cld-ds44 rev 7 e cree ? xlamp ? xm-l hvw leds pro duc t d escrip tion the cree xlamp ? xm-l high -v oltage white (h v w) le d provides the lighting- class performance and reliability of cree xlamp l e ds in the standard xm package. the xm-l h vw le d is an order of magnitude smaller than other high-voltage l e d arrays, allowing easy implementation of space-constrained lighting applications with smaller, more effcient high-voltage drivers. among these applications are lamps such as a19, b10, gu10, mr16, par30 and e17. fea tures ? binned at 85?c ? typical forward voltage of 46?v @ 44?ma, with vf binning available ? cree-standard xm mechanical footprint, with electrically neutral thermal path ? low thermal resistance: 3.5?c/w ? wide viewing angle: 110 ? maximum drive current: 125?ma ? maximum junction temperature: 150?c ? unlimited foor life at 30?oc/85% rh ? refow solderable ? available in standard cri and 80- minimum cri confgurations ? rohs compliant ? ul ? recognized component (e349212) ta ble o f c onte nts characteristics ...................................... 2 flux characteristics .............................. 2 relative spectral power distribution ... 3 r elative flux vs. junction temperature .......................................... 3 e lectrical characteristics ...................... 4 r elative flux vs. current ....................... 4 typical spatial distribution ................... 5 thermal design ..................................... 5 refow soldering characteristics ......... 6 notes ..................................................... 7 mechanical dimensions ....................... 8 tape and reel ........................................ 9 packaging ............................................ 10 product family data sheet copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www. cr ee. c om/x lamp
2 c har ac teristics characteristics unit minimum t ypical maximum thermal r esistance, junction to solder point c/w 3.5 viewing angle (fwhm) degrees 110 temperature coeffcient of voltage mv/c -35 esd classifcation (hbm per mil-std-883d) class 2 dc forward current ma 125 r everse current ma 0.1 forward voltage (@ 44?ma, 85?c) v 46 55 le d junction temperature c 150 fl ux c ha r ac teristic s ( t j = 85?c) the following table provides several base order codes for xlamp xm-l hvw leds. it is important to note that the base order codes listed here are a subset of the total available order codes for the product family. for more order codes, as well as a complete description of the order-code nomenclature, please consult the xlamp xm-l l ed binning and labeling document. color cc t range minimum luminous flux @ 44?ma o rder code minimum maximum group flux (lm) @ 85?c flux (lm) @ 25?c* cool white 5000?k 8300?k t3 220 255 xmlhvw-q0-0000-0000lt351 t4 240 278 XMLHVW-Q0-0000-0000LT451 t5 260 301 xmlhvw-q0-0000-0000lt551 neutral white 3700?k 5000?k t2 200 231 xmlhvw-q0-0000-0000lt2e5 t3 220 255 xmlhvw-q0-0000-0000lt3e5 t4 240 278 xmlhvw-q0-0000-0000lt4e5 warm white 2600?k 3700?k s6 182 211 xmlhvw-q0-0000-0000ls6e7 t2 200 231 xmlhvw-q0-0000-0000lt2e7 t3 220 255 xmlhvw-q0-0000-0000lt3e7 notes: ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. see the measurements section (page 7). ? typical cri for cool white (5000 k C 8300 k cct) is 68. ? typical cri for neutral white (3700 k C 5000 k cct) is 75. ? typical cri for warm white (2600 k C 3700 k cct) is 82. * flux values at 25?c are calculated and for reference only. copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l hvw led
3 rela tive spec tral po we r distribution rela tive fl ux v s. junc tion tempera ture ( i f = 44?m a) relative spectral power 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 relative radiant power wavelength (nm) 5000 k - 8300 k cct 2600 k - 3700 k cct relative flux output vs. junction temperature 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative luminous flux junction temperature (oc) copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l hvw led
4 elec trical c ha r ac teristic s ( t j = 85?c) rela tive fl ux v s. curre nt ( t j = 85?c) electrical characteristics (tj = 85oc) 0 20 40 60 80 100 120 140 40 42 44 46 48 50 52 forward current (ma) forward voltage (v) relative intensity vs. current (tj = 85oc) 0% 50% 100% 150% 200% 250% 0 25 50 75 100 125 relative luminous flux forward current (ma) copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l hvw led
5 t ypical spa ti al distribution ther mal design typical spatial radiation pattern 0% 20% 40% 60% 80% 100% - 90 - 70 - 50 - 30 - 10 10 30 50 70 90 relative luminous intensity angle (o) thermal design 0 20 40 60 80 100 120 140 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj - a = 10 c/w rj - a = 15 c/w rj - a = 20 c/w rj - a = 25 c/w copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l hvw led
6 refl o w so ldering c har ac teristics in testing, cree has found xlamp xm-l hvw leds to be compatible with jedec j-std-020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of the solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow-soldering equipment. profile feature lead-free solder average ramp-up rate (ts max to t p ) 1.2?c/second preheat: temperature min (ts min ) 120 c preheat: temperature max (ts max ) 170 c preheat: time (ts min to ts max ) 65-150 seconds time maintained above: temperature (t l ) 217 c time maintained above: time (t l ) 45-90 seconds peak/classifcation temperature (tp) 235 - 245 c time within 5?c of actual peak temperature (tp) 20-40 seconds ramp-down rate 1 - 6 c/second time 25?c to peak temperature 4 minutes max. note: all temperatures refer to topside of the package, measured on the package body surface. t p t l temperature time t 25?c to peak preheat ts t s t p 25 ramp-down ramp-up critical zone t l to t p ts max ts min copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l hvw led
7 n otes measurements the luminous fux, radiant power, chromaticity and cri measurements in this document are binning specifcations only and solely represent product measurements as of the date of shipment. these measurements will change over time based on a number of factors that are not within crees control and are not intended or provided as operational specifcations for the products. calculated values are provided for informational purposes only and are not intended as specifcations. pre?release qualifcation testing please read the led r eliability overview for details of the qualifcation process cree applies to ensure long-term reliability for xlamp leds and details of crees pre-release qualifcation testing for xlamp leds. lumen maintenance cree now uses standardized ies lm-80-08 and tm-21-11 methods for collecting long-term data and extrapolating led lumen maintenance. for information on the specifc lm-80 data sets available for this led, refer to the public lm-80 results document . please read the long-term lumen maintenance application note for more details on crees lumen maintenance testing and forecasting. please read the thermal management application note for details on how thermal design, ambient temperature, and drive current affect the le d junction temperature. moisture sensitivity cree recommends keeping xlamp leds in the provided, resealable moisture-barrier packaging (mbp) until immediately prior to soldering. unopened mbps that contain xlamp leds do not need special storage for moisture sensitivity. once the mbp is opened, xlamp xm-l hvw leds may be stored as msl 1 per jedec j-std-033, meaning they have unlimited foor life in conditions of 30 oc/85% relative humidity (rh). regardless of storage condition, cree recommends sealing any unsoldered leds in the original mbp. rohs compliance the levels of r ohs restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2011/65/ec (rohs2), as implemented january 2, 2013. rohs declarations for this product can be obtained from your cree representative or from the product documentation sections of www.cree.com . ul ? r ecognized component level 4 enclosure consideration. the led package or a portion thereof has been investigated as a fre and electrical enclosure per ansi/ ul 8750. vision advisory warning: do not look at an exposed lamp in operation. eye injury can result. for more information about leds and eye safety, please refer to the led e ye safety application note . copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l hvw led
8 m echanical dimensions thermal vias, if present, are not shown on these drawings. all measurements are .13 mm unless otherwise indicated. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 5.00 5.00 3.095 0.2 mm 0.73 .50 3.78 2.78 4.78 r 2.26 4.78 .50 4.78 4.78 .50 .50 2.78 4.78 4.78 .97 .25 .80 .50 .25 .80 1 / 1 16.000 c 2610-00018 outline drawing, 5050 xml hv -- -- -- -- -- -- 08/1/11 d. cronin revisons rev description by date app'd b added dome radius dc 10/23/12 c changed solderpad and stencil dc 06/16/15 recommended pcb solder pad all dimensions are .13mm unless otherwise noted recommended stencil pattern (hatched area is opening) recommended pcb s older pad recommended s tencil pattern (hatched area is open) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 5.00 5.00 3.095 0.2 mm 0.73 .50 3.78 2.78 4.78 r 2.26 4.78 .50 4.78 4.78 .50 .50 2.78 4.78 4.78 .97 .25 .80 .50 .25 .80 1 / 1 16.000 c 2610-00018 outline drawing, 5050 xml hv -- -- -- -- -- -- 08/1/11 d. cronin revisons rev description by date app'd b added dome radius dc 10/23/12 c changed solderpad and stencil dc 06/16/15 recommended pcb solder pad all dimensions are .13mm unless otherwise noted recommended stencil pattern (hatched area is opening) b ottom view side view t op view copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l hvw led
9 tape and reel all cree carrier tapes conform to eia-481d, automated component handling systems standard. e xcept as noted, all dimensions in mm. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contaned within are the proprietary and cree confidential. this plot and the information of cree inc. notice surface finish: 63 330 +.25 -.75 12.4 +1.0 -.5 measured at edge 16.4 +0.2 .0 measured at hub 12.4 +.2 .0 measured at hub .2 13.1 1.9.4 .4 21 60 60 1 / 1 0.500 a 2400-00009 reel, 13" x 12mm, 3 piece snap - anti-static hips -- -- -- -- 09/29/09 d. cronin 2400-00009 index qty item comments 1 1 2400-00009-core 2 2 2400-00009-reel revisons rev description by date app'd size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.) loaded pockets (1000 lamps) leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (40 empty pockets min.) 12 1.75 4 8 3.35 1 / 1 3.000 b 2402-00012 xm loading spec -- -- -- -- -- -- 06/08/10 d. cronin revisons rev description by date app'd a loaded pocket count was 750 dds 11/8/10 bs b made cathode and anode note larger dc 2/26/12 end start user feed direction cathode side anode side 1 2 3 4 6 5 d c b a app'd date by revisions rev description size title of rev. sheet a drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 4600 silicon drive fax (919) 313-5558 durham, n.c 27703 phone (919) 313-5300 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 1 / 1 drawing scale a 2402-00011 xm 5050 carrier tape 4/23/10 d. cronin cree reference drawing for tek-pak drawing 018275 .36[.014] t 5.40[.213] ao 3.35[.132] ko 3.0 5.40[.213] bo 2.00[.079] p2 4.00[.157] po do1.50 +.10 -.00 .0591 +.0039 -.0000 [ ] 10.25 [.404] e2 7.0 12.00[.472] nominal 12.30 [.484] max w 1.75[.069] e1 5.50[.217]f 1.50[.059] d1 8.00[.315] p pocket size ao - 5.40mm [.213"] bo - 5.40mm [.213"] ko - 3.35mm [.132"] 1 2 3 4 6 5 d c b a app'd date by revisions rev description size title of rev. sheet a drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 4600 silicon drive fax (919) 313-5558 durham, n.c 27703 phone (919) 313-5300 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 1 / 1 drawing scale a 2402-00011 xm 5050 carrier tape 4/23/10 d. cronin cree reference drawing for tek-pak drawing 018275 .36[.014] t 5.40[.213] ao 3.35[.132] ko 3.0 5.40[.213] bo 2.00[.079] p2 4.00[.157] po do1.50 +.10 -.00 .0591 +.0039 -.0000 [ ] 10.25 [.404] e2 7.0 12.00[.472] nominal 12.30 [.484] max w 1.75[.069] e1 5.50[.217]f 1.50[.059] d1 8.00[.315] p pocket size ao - 5.40mm [.213"] bo - 5.40mm [.213"] ko - 3.35mm [.132"] 1 2 3 4 6 5 d c b a app'd date by revisions rev description size title of rev. sheet a drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 4600 silicon drive fax (919) 313-5558 durham, n.c 27703 phone (919) 313-5300 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 1 / 1 drawing scale a 2402-00011 xm 5050 carrier tape 4/23/10 d. cronin cree reference drawing for tek-pak drawing 018275 .36[.014] t 5.40[.213] ao 3.35[.132] ko 3.0 5.40[.213] bo 2.00[.079] p2 4.00[.157] po do1.50 +.10 -.00 .0591 +.0039 -.0000 [ ] 10.25 [.404] e2 7.0 12.00[.472] nominal 12.30 [.484] max w 1.75[.069] e1 5.50[.217]f 1.50[.059] d1 8.00[.315] p pocket size ao - 5.40mm [.213"] bo - 5.40mm [.213"] ko - 3.35mm [.132"] copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l hvw led
10 p ac k aging label with cree bin code, qty, lot # label with cree bin code, qty, lot # vacuum-sealed moisture barrier bag dessicant (inside bag) humidity indicator card (inside bag) patent label label with customer order code, qty, reel id, po # patent label label with cree bin code, quantity, reel id label with cree bin code, quantity, reel id label with cree order code, quantity, reel id, po # label with cree order code, quantity, reel id, po # label with cree bin code, quantity, reel id unpackaged reel packaged reel boxed reel copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? and xlamp ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l hvw led
|
